Catler CP 8010 - Manual (Page 9)

7 7
ASSEMBLING YOUR CITRUS PRESS CP 8010
Step 4.
Place the Juicing Cone onto the Drive Shaft
and press down lightly to lock the Cone into
position. Step 5.
Insert the Fruit Dome onto the underside of the
Juicing Press Arm by aligning the tab on top
of the Fruit Dome with the hole in the Juicing
Press Arm. Hold onto the Juicing Press Arm and
press the Fruit Dome up and backwards until
the Dome locks into position. Note: The Fruit
Dome is keyed, and can only be inserted in
one way (this will ensure that it does not rotate
through operation). Step 6.
Ensure the Anti-drip Juice Spout is pushed
down into the pouring position.
Step 7.
Place a suitable sized glass or jug underneath
the Juice Spout.