Catler CP 8010 - Manual (Page 13)

11 11
OPERATING YOUR CITRUS PRESS CP 8010
Step 7.
Remove the used fruit from the Juicing Cone.
Empty excess pulp and seeds from Stainless
Steel Filter as required.
Repeat Steps 3-7 to continue juicing.
NOTE:
The Stainless Steel Filter should be
emptied when full with pulp and
seeds. The Filter can be emptied
during juicing by switching the Citrus
Press „OFF“ at the On/Off button and
carefully removing the Juicing Cone
and Filter. Clean and replace Stainless
Steel Filter and Juicing Cone before
continuing to juice.
Do not allow the Stainless Steel Filter
to overfi ll as this may prevent correct
operation or damage the unit.