Catler CP 8010 - Manual (Page 8)

ASSEMBLING YOUR CITRUS PRESS CP 8010
Step 1.
Pull the Juicer Press Arm up and backwards,
away from the Motor Base, until fully extended. Step 2.
Place the Juice Collector onto the Drive Shaft on
top of the Motor Base. Ensure the Juice Spout
fi ts into the semi-circular groove at the front of
the Motor Base. Step 3.
Insert the selected Stainless Steel Filter (fi ne
or coarse) into the Juice Collector, aligning
the indent with arrow in the bottom of the
Filter over the corresponding tab with arrow
in the Juice Collector. Use the Coarse Filter for
maximum pulp content in the juice and the Fine
Filter to decrease the pulp content in the juice.
6
ASSEMBLING YOUR CITRUS PRESS CP 8010