Catler CP 8010 - Manual (Page 17)

CARE AND CLEANING
• Always ensure that the Citrus Press CP 8010
is switched OFF at the On/Off button, the
power is switched off at the power outlet
and the plug is removed from the power
outlet before cleaning, disassembling,
assembling and storing the appliance.
• Follow these instructions to clean all
surfaces or parts that come into contact
with food during juicing:
1. For easy cleaning – immediately after
each use rinse removable parts under warm
water to remove wet pulp. Allow parts to air
dry before reassembling.
2. For thorough cleaning - after
disassembling the appliance, all removable
parts should be washed in hot soapy water
or on the top shelf of the dishwasher. The
Motor Base and Juicing Press Arm should
be wiped with a soft, damp cloth. All
parts should be dried thoroughly before
reassembling.
• Store the cleaned and reassembled Citrus
Press in an upright position in a cool, dry
place. Do not place any items on top of the
Citrus Press whilst stored.
15 15
CARE AND CLEANING
NOTE:
Rinse or wash all removable parts
immediately after use. Dried citrus
pulp is diffi
cult to remove and may
stain. If any staining does occur, wipe
the aff ected part/s with undiluted
dishwashing liquid, rinse and dry
thoroughly.
NOTE:
Do not soak the Stainless Steel Filters
or other removable parts in bleach.
Never immerse the motor base in
water or any other liquid. Do not use
harsh abrasives.