Catler GR 8012 - Manual (Page 18)

16
CARE AND CLEANING
CARE AND CLEANING
Before cleaning, switch the grill off at the
ON/OFF button, switch off at the power outlet
and unplug. Allow your Contact Grill to cool
before cleaning. The appliance is easier to clean
when slightly warm.
Always clean your Contact Grill after each use to
prevent a build up of baked-on foods.
Wipe cooking plates with a soft cloth to remove
food residue. For baked on food residue squeeze
some warm water mixed with detergent over
the food residue then clean with a non abrasive
plastic scouring pad.
NOTE:
The cooking plates are coated with
a non-stick surface, do not use abrasives.
Do not use spray-on non-stick coatings
as this will aff ect the performance of the
non-stick surface on the cooking plates.
CLEANING THE DRIP TRAY
Remove and empty the Drip Tray after each use
and wash the tray in warm, soapy water. Avoid
the use of scouring pads or harsh detergents as
they may damage the surface.
Rinse and dry thoroughly with a clean, soft cloth
and replace.
QUANTANIUM SCRATCH RESISTANT COATING
Your Contact Grill features a special scratch
resistant non-stick coating that makes it safe to
use metal utensils when cooking.
Regardless of this fact, Catler recommends
that care is taken with the non-stick coating
particularly when using metal utensils.
Do not use sharp objects or cut food inside the
Contact Grill. Catler will not be liable for damage
to the non-stick coating where metal utensils
have been misused.
Cooking on a non-stick surface minimises the
need for oil, food does not stick and cleaning is
easier.
Any discolouration that may occur will only
detract from the appearance of Contact Grill and
will not aff ect the cooking performance.
When cleaning the non-stick coating, do not
use metal (or other abrasive) scourers. Wash in
hot soapy water. Remove stubborn residue with
a non abrasive plastic scouring pad or nylon
washing brush.
WARNING: DO NOT IMMERSE ANY PART OF THE CONTACT GRILL GR 8012 IN WATER OR ANY OTHER
LIQUID