Catler GR 8012 - Manual (Page 13)

11
OPERATING YOUR CONTACT GRILL GR 8012
USING THE ADJUSTABLE GRILLING HEIGHT
CONTROL FEATURE.
Your Contact Grill features an Adjustable Grilling
Height Control feature which allows you to fi x
the top plate to a range of positions above the
base plate.
This allows your Contact Grill to be used as an
open toaster, ideal for toasting open sandwich
style ‘melts’. It can also be used to grill delicate
ingredients such as fi sh and hamburger buns
without squashing.
1. Allow the Contact Grill to preheat until the
red heating light goes out.
2. Place the food to be grilled on the base
plate.
3. Move the Adjustable Grill Control clip on the
right hand side of the Contact Grill to the
desired height (see Fig 5).
4. Slowly lower the top plate, using the
levelling handle on the top right-hand side
of the plate, until it rests in the appropriate
position above the food (see Fig 6).
5. The top plate will radiate the desired heat
to melt ingredients such as cheese or lightly
grill foods.
NOTE:
The Adjustable Grill Height Control can
be moved to accommodate thick or thin
foods by sliding the clip forwards or
backwards along the arm.
BASE PLATE TILT DIAL
1. To place the base plate into the sloped
position, simply turn the Base Plate Tilt Dial
anti-clockwise until the dial reaches the
‘angle’ position. This position is suitable for
achieving the maximum fat drainage when
using the Contact Grill as a closed grill.
2. To place the base plate into the fl at position,
turn the Base Plate Tilt Dial clockwise until
the dial reaches the ‘fl at’ position. This
position is ideal for cooking sausages,
pancakes, eggs, etc when a fl at plate is
required so that the foods do not run or
slide off the grill. It is important to use the
fl at position when using the Contact Grill as
an open grill.
5 6