Catler GR 8012 - Manual (Page 10)

8
OPERATING YOUR CONTACT GRILL GR 8012
OPERATING YOUR CONTACT GRILL GR 8012
Remove any promotional materials and
packaging materials before use. Check that
the cooking plates are clean and free of dust. If
necessary, wipe over with a damp cloth.
When using the Contact Grill for the fi rst time
you may notice a fi ne smoke haze. This is caused
by the fi rst heating of some of the components.
There is no need for concern.
TO USE AS AN OPEN GRILL
1. Insert the plug into a 230/240 V power
outlet and switch the power ON. Switch the
on/off button to ‘I’. The red heating light will
illuminate.
2. Ensure the Removable Drip Tray is correctly
inserted and positioned back into the
appliance (see Fig 1).
3. Ensure the top plate is in the closed position
for more effi
cient preheating.
4. Turn the Base Plate Tilt Dial to the Flat
position.
5. Turn the Variable Temperature Control Dial
to ‘Sear’ for fast preheating.
6. Allow the Contact Grill to preheat until the
red heating light goes out.
7. The Grill must be closed to release the lock.
Turn the Grill Lock Dial on the side of the
grill to horizontal position (see Fig 2) and
use the handle to pull the top plate into the
open position (see Fig 3).
NOTE:
It is important that the base plate is in
the fl at position when using as an open
grill.
1 2 3