Catler GR 8012 User Manual

Page 12

OPERATING YOUR CONTACT GRILL GR 8012

10.

When the food is cooked, use the handle to
open the top plate. Remove the food using
a plastic spatula.

NOTE:
The red heating light will cycle on
and off during the cooking process
indicating that the correct temperature
is being maintained.

TO USE AS A SANDWICH PRESS

Insert the plug into a 230/240 V power
outlet and switch the power on. Switch the
ON/OFF button to ‘I’. The red heating light
will illuminate.

Ensure the Removable Drip Tray is correctly
inserted and positioned back into the
appliance.

Ensure the top plate is in the closed position
for more effi

cient preheating.

Turn the Base Plate Tilt Dial to the Flat
position.

Turn the Variable Temperature Dial to the
‘Sandwich’ position.

Allow the Contact Grill to preheat until the
red heating light goes out.

During this time, prepare the sandwich and
place it onto the base plate. Always place
sandwiches towards the rear of the base
plate.

Use the handle to close the top plate. The
top plate has a fl oating hinge system that
is designed to press down evenly on the
sandwich. The Grilling Height Control on the
right hand side of the top plate is used to
adjust for the thickness of the sandwich. The
levelling handle on the right hand side of
the top of the grill may be used to even out
the top plate.

NOTE:
Always allow the Contact Grill to
preheat until the red heating light goes
out.

Toasting should take approximately
5-8 minutes. Exact toasting time will be
a matter of preference. It will also depend on
the type of bread and fi lling used.

10.

When the sandwich is cooked, use the
handle to open the top plate. Remove the
sandwich using a plastic spatula. Never use
metal tongs or a knife as these can cause
damage to the non-stick coating of the
cooking plates.

NOTE:
The red heating light will cycle on
and off during the toasting process
indicating that the correct temperature
is being maintained.

CAUTION: FULLY UNWIND THE CORD FROM THE CORD STORAGE FACILITY BEFORE USE