Salter Brecknell CP80 - Manual (Page 3)

CP80 User Guide Page 3 of 11
2 INTRODUCTION
This document is a User Guide, written for the person connecting and using the CP80 hand held
impact printer. Please read this Guide carefully before making any connection.
The CP80 includes the EPSON M190 24-column impact printer mechanism
The CP80 always requires a data input from a host. The power arrangement could be:
a direct mains powered PSU unit “optional”
a direct vehicle cable for powering from a vehicle supply “optional”
2.1
NOTES ON PRINTER FIRMWARE REVISIONS
The manufacturer reserves the right to modify and improve the firmware in its printer products at any
time. Whilst every effort is made to ensure backward compatibility, no guarantee in this respect is
given or implied.
2.2
COPYRIGHT NOTICE AND DISCLAIMER
Copyright subsists in the manufacturer’s intellectual property, including controller firmware (embedded
software) and circuit diagrams, pin connection lists and application data. No warranty in respect of
patent rights of the manufacturer or of third parties is given. Unauthorised reproduction or
amendment of controller firmware may result in prosecution.
EPSON is a registered mark of its owner Seiko Epson Corporation. References to this or other
owners' marks in this document are for illustrative purposes only.
The manufacturer does not assume responsibility for interchangeable functionality of other parties'
command sets.
2.3
DOCUMENTATION REVISION HISTORY
Title (and Revision Number)
Issue Date Comments
User Guide to the CP80 29 Mar 2011 Original release
(Ref xxxxxusg21.pdf)