Salter Brecknell 7050 User Manual

Page 14

or
key in a new sample size larger than 10.
Press the ENTER key, then count out the
new sample amount onto the scale and
press ENTER. . .

The display shows Standby

Standby

Standby. . .

. . .

computing piece weight

computing piece weight; then the
display shows the weight, count,
weight per piece, and pieces per
weight.

3. Place items to be counted on the scale. . .

Count and weight are displayed.

4. Repeat step three until you are done with all

identical

identical items.

Follow these steps to perform a sampling
operation using the bulk mode:

1. Press the SAMPLE

SAMPLE

SAMPLE softkey. . .

The scale zeroes itself and the display
prompts you to: Load 10 samples or

Load 10 samples or

key in a sample size from 11 to

key in a sample size from 11 to
999. Sample Size = 10

999. Sample Size = 10

999. Sample Size = 10. Ten is the
default sample size. Minimum sample
size can be changed in configuration.

2. Place all the items on the scale

or
key in a new sample size larger than 10,
press the ENTER

ENTER

ENTER key, then count out the

new sample amount onto the scale. . .

The display shows Standby

Standby

Standby. . .

. . .

computing piece weight

computing piece weight, then the
display shows the weight, count,
weight per piece, and pieces per
weight.

Sampling in Bulk Mode