Salter Brecknell 7050 User Manual
Page 11

Single Piece Weighing
Gross Weighing
Net Weighing
Place a single piece on the weight platter.
Using the “UNITS” soft key, you can toggle
between 0.001 lb. and 0.01 oz. The weight of
the single piece will be displayed in Areas B
and C.
Follow these steps to perform a gross weighing
operation.
1. With the scale powered up, zero the scale
if the display does not already show zero by
pressing the ZERO
ZERO
ZERO
ZERO
ZERO key. . .
Display shows 00000 weight.
2. Place the item to be weighed on the scale
platform. . .
Gross weight is displayed.
3. Remove the item and repeat all steps for
the next item.
Follow these steps for performing a net weighing
operation:
1. With the scale powered up, zero the scale
if the display does not already show zero by
pressing the ZERO
ZERO
ZERO
ZERO
ZERO key. . .
Display shows 00000 weight.
2. Place the container to be tared on the scale
platform. . .
Gross weight is displayed.
3. Press the TTTTTARE
ARE
ARE
ARE
ARE key. . .
The weight is tared, 00000 weight is
displayed and the tare and net
annunciators appear on the display.
8