Salter Brecknell CS-200M - Manual (Page 6)

6
Figure 11. Slide the Footrest Assembly So That Holes Line Up
Once the footrest is secured and the screws tightened for it, secure the molded seat onto the chair
scale frame.
6. Secure the four screws (shown below).
Figure 12. These Screws Hold The Molded Chair to the Scale Base
Arm Rest Installation
The last item to be installed on the mechanical chair scale are the two arm rests.
Figure 13. Detachable Arm Rest for the Mechanical Chair Scale
Use the following steps to attach the two arm rests to the mechanical chair scale molded seat.
Push footrest assembly back
so that the holes line up.
Secure screws (only
one shown)