Salter Brecknell S122 - Manual (Page 56)

5.11 F8 - setting the hold function 5 Configuration Mode
S122 User / Service Instructions
5.11 F8 - setting the hold function
You can set up the hold function so pressing the key
prints the displayed value. You must also set up the correct
transmit baud rate for the receiving device.
H old 0
No hold function.
H old 1
When the weight is continuously changing the scale
automatically holds the maximum value.
Press any key other than to clear the hold.
H old 2
When the weight becomes stable the scale automatically
holds the displayed value. Press any key other than to
clear the hold.
H old 3
When the weight becomes stable the scale automatically
holds the displayed value. The hold clears when the weight is
removed and the machine returns to zero weight.
ENTER
002.500
lb
ENTER
ENTER