Canon IP4000 - Manual

Instructional Manual Continuous Ink System for use in Canon ip4000/ip5000
Before using this product, please read and follow all instructions. After opening your package, make sure to check that
all the accessories.
Conduct Parts Check:
1. Accessories
a. Continuous Ink System (1) b. Air breather plugs (5) & Syringe (1)
c. Square shape clip adhesive pad (1) d. T shape clip adhesive pad (1)
Fig.1-1 Fig.1-2
2. Set-Up Continuous Ink System(CIS)
a. Before installation, lay out all your parts in front of your printer.
b. Check your system for any leakage, and make sure your tubing system is tightly connected and straight.
c. Place the CIS on the right hand side of the printer, and keep it on the same level surface as the printer.
d. Hold down the ink tank with one hand and remove the original air stoppers as shown (Fig.2-1).
e. Install the Air breather plugs wider end into the ink reservoir tank, making a snug fit (Fig.2-2).
Fig.2-1 Fig.2-2
3.Cartridge Installation
a. Open the original cartridge cover and take out the original cartridges (fig. 3-1).
b. Remove the cover from CIS cartridge. install CIS cartridges in their respective color position,
push the cartridges all the way down in compartment just as you would the original cartridges(Fig.3-2).
c. close down the cartridges cover as shown.(Fig.3-3)