beautypg.com

Factory default – AVer FD1020 user manual User Manual

Page 74

background image

68

Factory Default

1. To recover the default IP address and password, please follow the following steps.

2. Remove power and Ethernet cable.

3. Press and hold the button and connect power and Ethernet cable to the camera again and hold for

round 30 seconds for system booting.

4. Release the button when camera finishes proceed.

5. Re-login the camera using the default IP (http://192.168.1.168)

or DHCP, and user name (admin),

password (admin).

See also other documents in the category AVer Camcorders: