AVer FD1020 user manual - Manual (Page 33)

27
System > General
I n this section, only admin level is authorized to configure the IP camera system maintenance and the
date and time settings.
System > General > Maintenance
In the Maintenance tab, the administrator can check the system event log, upgrade the system
firmware, reset the configuration settings without having to change the user management and network
settings, reboot, and restore all back to factory default settings.
(1)
(2)
(3)
(4)
(5)
(6)
Name Function
(1) Export Settings
Upload to save all the configuration settings from the IP camera to
computer hard disk.
(2) Reboot
Turn the IP camera off and on again.
(3) Factory default
Set all the configuration settings back to default except the user
management and network settings.