AVer FC1320-P&PW user manual - Manual (Page 69)

63
ENGLISH
PIR setting:
Enable PIR function, the camera will be triggered when it detect PEOPLE in its detection range (within
5 Meter), and then send video or snapshot to specific mail addresses, trigger the output devise, play
sound, or save video to FTP/ Micro SD card/ Samba.
Select a sound file if you tick "Audio out". You can play the sound by click "Apply" and then "Test".
As for "Interval", For example, if you select "10 sec" here, once a person is detected and action is
triggered, it cannot be triggered again within 10 seconds.
[Note] The interval of two video files on SD/SDHC card is fixed with 30 seconds.