AVer SF1311H-C - Manual (Page 61)

57
Appendix E: Specifications
Camera
Image Device 1.3 Mega-pixel image sensor
Effective Pixels 1280 x 1024 pixels
Sensitivity 1.0V/lux-sec (550nm)
Signal to Noise 44dB
Lens f:4.3mm / F:1.8
IP Module
Video
Video Encoder H.264, MPEG4 and Motion JPEG simultaneously (Tri-encoders)
Video Profile
11 profiles simultaneously
- H.264 SXGA/ VGA / QVGA / QQVGA
- MPEG4 VGA / QVGA / QQVGA
- M-JPEG SXGA/ VGA / QVGA / QQVGA
Frame Rate
Mega-pixel mode: Up to 15fps for all 11 profiles
VGA mode: Up to 30fps for all 9 profiles
Image Setting
De-noise
Brightness, sharpness, contrast, color
Text, time and date overlay
Streaming Simultaneously multi-profile streaming
Streaming over UDP, TCP, or HTTP
Multicast streaming
M-JPEG streaming over HTTP
Supports 3GPP mobile surveillance
Controllable frame rate and bandwidth
Constant and variable bit rate (MPEG4 / H.264)
Audio
Audio Encoder RTSP: G.711 64kbps, G.726 32kbps
3GPP: AMR
Audio Streaming One-way or two-way
Microphone Built-in microphone
Audio Output Line level out
Network
Supported Protocols
TCP, UDP, HTTP, SMTP, FTP, NTP, DNS, DDNS, DHCP, ARP, Bonjour, UPnP,
RTSP, RTP, RTCP, PPPoE, 3GPP, ICMP, IGMP, SAMBA
Security Password protection, IP address filtering, user access log
Users
20 simultaneous unicast users
Unlimited users using multicast
Ethernet 10/100M auto negotiation
Wireless IEEE 802.11n (for wireless model only)
PoE 802.3af (for PoE model only )
System Integration
Application Programming
Interface Open API for software integration
SDK
Alarm Triggers Intelligent video motion detection and external input
Motion Detection 10-zone video motion detection
Alarm Events
File upload via FTP, SAMBA or email
Notification via email, HTTP, and TCP
External output activation
Go to PTZ preset position
Audio alerting output
Video Buffer Pre- and post- alarm buffering
General
RAM 128MB
ROM 8MB
Power Supply 12V DC external power adapter
PoE IEEE 802.3af (for wired model only)