Daily care, Spare accessories – CatEye CC-AT100 User Manual

Page 17

DAILY CARE

If the altitude sensor cover is clogged with mud etc., the unit doesn't measure altitude. After the ride
on muddy roads or in the rain, check the situation of the sensor cover according to the following
instruction.
1. Turn the sensor cover counterclockwise with a screwdriver and take it off.
2. Carefully take out the filter inside, and wash the sensor cover and the filter with clean water.
3. Put the filter back as it was, and close the sensor cover.

Note: There is an altitude sensor under the filter. Be sure not to insert pins or sharp objects.

SPARE ACCESSORIES

The following parts are available separately.

#169-6560

Bracket Sensor Kit

#169-6565

Bracket Sensor Kit (Long)

#169-6567

Center Mount Bracket Kit

#169-6562

Center Mount Bracket Kit (Long)

#169-6569

Stem Mount Bracket Kit

#166-5120

Wheel Magnet

#169-6170

Attachment Kit

#169-6280

Universal Sensor Band

#169-9730

Heavy duty Wire and Bracket Sensor Kit

#169-9870

Sensor Holster

#169-9835

Wrist Band

#169-9860

Main Unit Holder

#166-5155

Lithium Battery (CR2032)

#169-9880

Altitude Sensor Cover/Filter

Open

Altitude Sensor Cover

Filter

#169-6560/#169-6565

#169-6567/#169-6562