AVer System Contrll Pro User Manual (NV version) - Manual (Page 36)

30
2.9.4 Setup preset position and Use Preset
Setup Preset Position
1. Press button and the Camera preset setup screen will appear on LCD screen.
2. Please adjust the lens position of the camera to wanted position.
3. And then, using numeric key pad to enter the preset position number. The numbers of preset
position depends on the support of the PTZ camera.
4. Press Enter button to confirm the setting.
5. When the “Complete” message appears on the LCD screen, the setting is done.
6. To setup another preset position, please repeat the step 2 ~ 4.
Using the Preset Button
Press the button and enter the preset position number, the camera will move to the preset
position that user has setup.
1. Press button and the Preset position screen will appear on LCD screen.
2. Using numeric key pad to enter the number of the preset position and press the Enter button.
3. When the “Complete” message appears on the LCD screen, the function is completed.