AVer System Contrll Pro User Manual (NV version) - Manual (Page 20)

14
2.1.2 Switching to USB DVR Mode
When the System Controller is connecting with DVR system through the USB port, the System
Controller mode should be in USB DVR mode in order to operate the DVR system normally. If the
mode is not USB DVR mode, please follow the below steps to switch to USB DVR mode.
i - The default mode is USB DVR mode.
- The USB CMS and 485 CMS mode is supported for CMS application.
- If System Controller is connecting with PTZ camera through RS485 port, please
refer to
Chapter 3 for operation description.
1. In 485 PTZ or 485 DVR menu screen, press button to enter Controller setup screen.
2. Press button to enter Mode setup screen.
485-PTZ menu screen
i
If the password function is enabled, user needs to enter the password for mode
switching.
3. In Mode setup screen, press button to switch the mode to USB DVR mode.