AVer MOB1304-NET - Manual (Page 92)

86
8.3 Familiarizing the Remote Console Buttons
i Right-click on the screen can enable GPS function (see also Chapter 2.4.3 ) if the remote MOB DVR
server has installed the GPS device and enabled the GPS function.
Name Function
(1) Exit Close/minimize remote console application
(2) Split Screen Mode Select from 2 different split screen type to playback the recorded video file of all the
cameras or one camera on the screen.
(3) Record Start/stop video recording.
(4) Network Enable/disable remote system access. This feature allows you to access DVR
server from a remote location via internet connection.
(5) Setup Configure the Remote Console setting. (see also Chapter 7.2.1 )
(6) PTZ To call out PTZ control panel for controlling PTZ camera.
(7) Preview Switch to Preview/Playback mode. This allows you to view live camera display.
(8) Playback Switch to Playback mode. This allows you to view the recorded video file. (see also
Chapter 7.4 )
(9) Status Bar Display the current date, time and hard disk free space.
(10) Camera ID Show the number of cameras that are being viewed. When you are in single screen
mode, click the camera ID number to switch and view other camera.
(11) Snapshot Capture and save the screen shot either in *.jpg or *.bmp format.
(12) Auto Scan Enable/disable channel auto cycle switch.
(13) Full screen Use the entire area of the screen to only display the video.
To return, Right click the mouse or press ESC on the keyboard.
(14) Audio Enable/disable the sound display
(15) DirectDraw Enhance the video quality.
i Direct Draw function supports for certain VGA card. For more information, please contact your VGA card
vendor.