AVer MOB1304-NET - Manual (Page 39)

33
6. Select the Video Quality to High, and then, mark the Show POS message to display the GPS data
on the Monitor.
7. Click OK to save and complete the change.
8. If the MOB DVR server hasn
‟t been added any channels for monitoring, please refer to Chapter 4.3 of
the CMS user ‟s manual to add the channels for monitoring.
9. Click Monitor to switch to the Monitor mode. User should see the GPS data display on Monitor UI as
following shown:
i
Position of the GPS data display relate to the setting of Monitor Text Setting in the System setting of the
CMS.

