beautypg.com

5 advanced features and options – Crown Audio CTs 1200 User Manual

Page 44

background image

Operation Manual

CTs Power Amplifi ers

page 44

Choosing the Right Module
To order accessory modules for your amplifi er,
please refer to the model tag (located on the back
panel of the amplifi er) for your amplifi er’s specifi c
model number. Then refer to the chart below to select
the correct accessory for your requirements.

VCA MODULE

CTs 4200

VCA-MC4

CTs 4200A

VCA-MC4A

CTs 8200

VCA-MC8

CTs 8200A

VCA-MC8

Wall-Mount level control panels for use with
VCA module:

1-VCAP: See Figure 5.4. Used in conjunction with a
VCA-MC module, this is a single-gang panel
pro viding remote volume control for one or more
CTs amplifi er channels. The potentiometer on the
panel is wired directly to one of the VCA connectors
on the VCA-MC.

4-VCAP: See Figure 5.5. This is a two-gang panel
providing remote volume control for four or more
CTs amplifi er channels. The potentiometers on the
panel are wired directly to the respective VCA
con nector on the VCA-MC.

Refer to the VCA-MC Operation Manual for wiring of
the single or multiple channel level control.

Your amplifi er may have come with a VCA-MC
module already factory-installed, or your choice of
MC modules can be easily added to the amplifi er by
any authorized Crown Service Center. Contact
Crown Technical Support for more details.

5.3.2 Input Sensitivity

The CTs 4200 and CTs 8200 have a fi xed input
sen sitivity of 1.4V. A service option is available for
other input sensitivities.

Figure 5.3 VCA-MC8 Module

Figure 5.5 4-VCAP Module

5 Advanced Features
and Options

Figure 5.4 1-VCAP Module

5.3 Options

Below are some available options. For current
options, visit the Crown website at www.
crownau dio.com.

5.3.1 Control Modules

VCA-MC (VCA module): See Figure 5.3. Pro vides
independent remote level control for each channel.
4-pin removable Phoenix-style barrier connectors
provide the +10VDC control voltage, ground, and
control lines for two amplifi er chan nels. Thus, 4-
channel amplifi ers use two connec tors; 8-channel
amplifi ers use four connectors.