AVer W30 user manual - Manual (Page 11)

6
ENGLISH
Control Panel
(10)
(11)
(6)
(4)
(1)
(2)
(3)
(5)
(7)
(8)
(12)
(9)
(fig. 1.9)
Name Function
(1) POWER
Turn the unit on/standby mode.
(2) AUTO FOCUS
Adjust the focus automatically.
(3) RECONNECT
Reconnect the W30 camera and base.
(4) SOURCE Select from 6 types of display options.
 CAM
– display the video signal from the W30 camera.
 RGB IN – display the video signal from the W30 base RGB IN port.
 PLAYBACK – display the picture from the memory source.
 CAM/RGB IN – half of the screen display the video signal from the
W30 camera and the other half display the video signal from W30
base RGB IN port.
 SPLT SCRN – half of the screen display the video signal from the
W30 camera and 8-thumbnail picture from the memory.
 PIP – display a thumbnail picture from the memory at the corner of
the screen over the full screen video signal from the W30 camera.
(5) FREEZE - Freeze live images in camera mode.
- Pause slide show in playback mode.
(6) CAP/DEL - Capture still image in Camera mode. In continuous capture mode,
press this button again to stop.
- Delete the selected picture in Playback mode.
(7) MENU
Open and exit the OSD menu.
(8)
- Make a selection in Playback mode and OSD menu.
- Play/Pause picture slide show.
(9) Show the wireless signal condition.
 Steady Green - binding the W30 camera with the W30 base.
 Continuous Green Flashing - data transition. It sends the W30
camera data to W30 base.
(10) USB Switch LED
Indicate the USB switch selection to show which USB port is
activated.

allowing you to use the W30 as USB camera or transfer the
captured images from the memory to computer.
 allowing you to save still image in the USB flash drive.