Alumax W1 TUB - Manual (Page 8)

4
10 1
2 3
4
2i 2j
2l
2k
2 WALL JAMB INSTALATION / INSATLLATION DES JAMBAGES / INSTALACIÓN DE PERFILES DE SUJECIÓN
INSTRUCTION MANUAL
8
Place U-chanel (4) temporarily on bottom of panel
(10).
Slide the panel (10) pre-assembled with expander
(2) and gasket (3) into the wall jamb (1).
Level the glass panel assembly with the wall jamb.
Lock into position by clamping the wall jamb and
expander with pliers.
FIXED PANEL / PANNEAUX FIXE
COVER THE PLIER’S TEETH BEFOREHAND TO AVOID
SCRATCHING THE ALUMINUM PARTS.
2 WALL JAMB INSTALATION
Insert one drop of silicone in each hole in the wall
before inserting the supplied wall plugs (4x)
Add silicone to exterior bottom edge of wall jamb.
Fasten the wall jamb to the wall with 1-1/4” screws (22)
through the previously installed wall plugs. (x4)
Add silicone to interior bottom edge of wall jamb
3a
3a 3b
3c
3d
3b
3c
3d
3
2i
2j
2k
2l
INSIDE OF TUB