Alumax M-DP93X - Manual (Page 17)

17
INSTRUCTION MANUAL
12B
3b
21
20a
20b
INTERIOR
SHOWER SIDE
12A
FASTEN THE BOTTOM GLASS CLIPS.
11
11A. Realign the aluminum “u” channels on the
threshold and drill a hole using a 1/8˝ drill
bit at about 2˝ from the edge. Put a drop
of silicone in each hole and fasten the “u”
channels with a 3/4˝ long screw (#22).
Cover each screw with the same clear set-
ting block(s) (#17) used previously.
12A. Reposition et level the glass panels and the corner
clips the same way as done in steps 8 to 10.
Secure the return panel with a locking plier.
12B. Combine the 3 3/8˝ screws (#20) with the screw
FASTEN THE RETURN PANEL.
12
3a
13