Alumax M-DP93X - Manual (Page 12)

12
INSTRUCTION MANUAL
7D
7B
MOUNT THE WALL JAMB.
7
7A. Place the wall jamb (#2) on the threshold at distance
"y" from the wall. Align it using a level. Trace the
outer edge of the wall jamb and the holes on the
wall. Remove the wall jamb.
7B. With a 1/4˝ drill bit, drill 3 holes into the wall using
the marks as a guide.
7C.
the drilled hole location, skip this step.
(b) Insert the wall plugs (#17) and put in each a drop
of silicone.
7D. Secure the wall jamb using the 1 1/4˝ screws (#18).
WALL STUD
TOP VIEW TOP VIEW
2
1
17
2
18
7A
2
7C(a) 7C(b)
18
18
7C
NOTE
CHOOSE 1 OF THE 2 HOLES AT THE TOP
AND BOTTOM OF THE WALL JAMB.
y
17