Alumax 300d - Manual (Page 2)

G03711142
12-21-05
Page 2 of 9
LIMITED WARRANTY AND REMEDY
Alumax Bath Enclosures warrants to its dealers, customers, and all subsequent purchasers and users, that
the products supplied by it shall be free from material defects in material and workmanship for a period
of one (1) year after shipment, provided they are installed and maintained according to Alumax Bath
Enclosures' recommended practices and installation instructions. This warranty shall apply only to defects
appearing within one (1) year from the date of shipment, and provided that Alumax Bath Enclosures is
promptly notified in writing of such defects. The sole and exclusive remedy with respect to the above
warranty or with respect to any other claim relating to defects or any other condition or use of the products
supplied by Alumax Bath Enclosures, however caused, and whether such claim is based upon warranty
contract, negligence, strict liability, or any other theory, is limited to repair or supply of such products, or
repayment by Alumax Bath Enclosures of the purchase price paid for it, at Alumax Bath Enclosures' option.
Alumax Bath Enclosures does not make any other representations or warranties, express or
implied, including, but not limited to, any implied warranty of merchantability and any implied
warranty of fitness for a particular purpose. In no event shall Alumax Bath Enclosures be liable
for special, direct, indirect, or consequential damages, including, but not limited to, loss or use of
profits.
Dealers agree to pass on to its customers and users in writing Alumax Bath Enclosures' Warranty and
Remedy as set forth above.
Laws and building and safety codes governing the design and use of bath enclosures vary widely. Alumax
Bath Enclosures does not control the selection of product configurations, operating hardware or glazing
materials, and assumes no responsibility therefor.
INSTALLATION NOTES
Unpack your unit carefully and inspect for freight damage. Lay out and identify all parts using the instruction
sheets as a reference. Before discarding the carton, check for small hardware bags that tend to fall to the
bottom of the box. If any parts are damaged or missing, refer to the descriptions noted in the instructions
when contacting your dealer for replacements.
Handle glazed panels carefully and protect the edges. Safety tempered glass is very resistant to breakage,
but the sharp corners of the panels can damage tile and floor coverings.
Please wear safety glasses whenever drilling or cutting. When drilling holes in ceramic tile or marble, use
a center punch and hammer to carefully break the surface glaze so the drill can start without skidding.
To install your Alumax Bath Enclosure you will need the following: tape measure, level, #2 Phillips
screwdriver, drill, 1/8" and 3/16" drill bits, hacksaw, pencil, and caulking (clear silicone recommended).
Optional tools include a miter box for cutting parts to length, files, center punch, and masking tape.