I- 1, Mercury battery loading – Canon Canonet 17 User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Mercury Battery Loading

Before using your Canonet G-III,

load it with the mercury battery.

To open cover of the battery com

partment, insert a fingernail in the

open slot, sliding the cover in the

direction of the arrow. By using a

slight pull outward, the cover will

hinge open.

I- 1

Insert the battery on the tab in

the compartment.

■

Be sure the mercury battery

is inserted only in the correct

direction.

■

A 1.3V M20 ( # 625) mercury

battery should be used—equivalent

the

Mallory

PX-625,

Eveready EPX-625.

Press cover to close.

Replacing Battery

When replacing the mercury bat

tery,

open

the

cover

the

mercury

battery

compartment

and slowly pull out the tab being

careful not to let the battery

drop out.

■ When the camera will not be

used for a long period, remove the
battery.