Using the built-in flash – Canon AF 35 ML User Manual

Page 24

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Using the Built-in Flash

If the camera-shake warning signal beeps

when you press the shutter button halfway,

use the pop-up flash. If, in this case, you do
not use the flash, the picture most likely will

be underexposed and blurred.

1 Push the flash switch ® in the direction

of the arrow; the built-in flash 0 will pop up.

2. Wait for the flash-ready lamp ® to light

up before you press the shutter button.

Note

If you press the shutter button before the flash-

ready lamp lights up, the picture may be too

dark. Also, do not press the shutter button con-