Using the built-in flash – Canon Snappy 50/20 User Manual

Page 21

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Using the Built-in Flash

Switch to flash photography if the view

finder lamp blinks rapidly when you

press the shutter button halfway. Use of

the flash will prevent blurred and overly
dark photos.

1 Push the flash switch out in the

direction of the arrow.

2 Wait for the flash-ready lamp ® to

glow; then shoot.

Notes

Do not continuously press the shutter but

ton halfway while waiting for the fiash-

ready iamp to glow; the flash will not

charge.

If you take the shot before the flash-ready
lamp glows, exposure will not be correct.

The flash cannot be used to "fill in"
shadows in daylight photography.