Canon EOS 620 - Manual (Page 145)

tinuous exposures are taken in sequence of
underexposure, correct exposure according to
camera’s meter and overexposure.
Multiple Exposures (EOS 620 Only):
Presetting up to nine exposures is possible.
Automaticaiiy cieared upon compietion.
AF Control System:
TTL-SIR (TTL secondary imaged registration)
phase-detection type using BASiS(base-stored im­
age sensor). AF operation starts when the shutter
button is pressed halfway. AF in-focus indicator
lights upon ranging compietion. Audibie indicator
(electronic beeper) can be turned on and off.
Three selectable modes:
1. ONE SFIOT: AF operation ends and focus is
iocked once ranging is completed. Shutter
does not release until ranging is completed
2. SERVO: Focus continuously adjusts to follow
the subject movement. Shutter can be releas­
ed at any time regardless of ranging comple­
tion.
3. Manual: By rotating the manual focusing ring
after focus mode switch is set to “M”.
AF Working Range: EV 1 —18 at ISO 100
AF Auxiliary Light:
The ultra-bright red LED (peak sensitivity: 700
nm) is automatically projected with specified
Canon Speedlites.
83