Connecting to a computer and retrieving images – Canon A5 User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I
Retrieving Images continued...
2. Connecting to a Computer and Retrieving Images
Follow the procedures below to retrieve
camera images.
Before you connect the camera to a
computer, always off the computer
and turn the camera's Mode Dial to
the L (Lock) position.
• Windows
•
Connect the camera to the PC's serial port
with the PC interface cable.
I '
'W
DIGITAL Terminal
\
.4
Serial Port
'
PCI nterf ace Cable '
‘
22
Once the camera is attached to the compu
ter, follow the procedures below to load
images and save them to the computer.
1) Turn the computer on.
2) Start your TWAIN-compliant application
program.
3) Turn the camera's Mode Dial
to the PC position.
4) Select [Canon PowerShot] from your
application's input device selection menu.
5) Start the TWAIN Driver from within your
application.
6) Use the TWAIN Driver to load the images
from the camera.