Basic operation —continued, Take the picture, Advance the film – Nikon F3 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BASIC OPERATION —continued-
20. Take the picture.
Look through the viewfinder and press the shutter release button
lightly to turn on the exposure meter. The shutter speed display indicates
the shutter speed selected by the camera. As long as neither +2000 nor
appears in the shutter speed display, the camera gives the correct
exposure. If either indication appears, adjust the aperture ring on the lens
until a desirable shutter speed is indicated. Should either indication appear
even after aill possible lens apertures have been tried, then the available
light is too bright or too dim for the meter's range. Use either artificial light
to increase the subject's brightness or a neutral density filter to reduce the
amount of light reaching the film.
Advance the film.
Stroke the film advance lever
to transport the film to the next frame
and get the camera ready for the
next shot.