Changing focusing screens – Nikon fe User Manual
Page 42
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CHANGING FOCUSING SCREENS
Three different types of focusing screens are available
for the Nikon FE camera, each designed to meet specific
focusing requirements. The type K screen comes with
the camera as standard equipment.
After removing the lens from the camera body, look into
the mirror box. At the top front of the mirror box cast
ing, there is a latch for snapping open the focusing screen
frame holder. Then slip the small tip of the special
tweezers, which are supplied with the accessory focusing
screen, under the latch and pull outward to spring open
the holder. Take the screen out of the holder by grasping
the small tab with the tweezers. To avoid getting
smudges or fingerprints on the screen’s optical surfaces,
do not remove the screen with your fingers.
To mount another screen, carefully place it into position
with the flat side facing downward and the tab out
(closer to the right side, facing the camera), then push
the front edge of the holder upward until it clicks into
position.
41