Nikon Autofocus Speedlight SB-22 User Manual
Page 59
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4. Choose an aperture and perform a test firing. If the
ready-light blinks after test firing, indicating under
exposure may occur at the aperture set on the lens,
use a wider aperture or reduce the bounce distance
and test fire the flash again.
5. Bracket your exposures. You are recommended to
take additional shots with the camera’s exposure
compensation dial set in the -t- or - direction (not
possible with Nikon F-401/N4004) for TTL auto flash
operation or with the lens opened up or stopped
down one or two f/stops for non-TTL auto flash
operation.
41