Setting camera shutter speed – Nikon Autofocus Speedlight SB-22 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SETTING CAMERA SHUTTER SPEED
Set camera's shutter speed, referring to the table
below.
As shown in the table, automatic sync speed setting is
available with most Nikon cameras.
Nikon camera
Synchronization
speed (sec.)
Camera setting
Running shutter
speed (sec.)
Viewfinder shutter speed indication
F-501/N2020*
F-301/N2000*
1/125 Of Slower
POUAL(F-501/N2020only),P,PHI
1/125
125 lights up
A, 1/2000~1/250sec.
1/125
125 lights up and LED for proper non-flash shutter speed blinks
1/125->1sec. andB
as set
LEO for manually set shutter speed lights up and LED for proper non-flash shutter
speed blinks: no indication at B
F-401/N4004
1/100 or slower
Shutter dial
Aperture dial
A
S
1/100
—
A
1.4-32
—
1/2000-1/125 sec.
S
—
1/60-1 sec.
S
as set
—
l/2000-l/l25sec.
1.4-32
1/100
—
1/60- Isec, and B
1.4-32
as set
—
FA
All shutter speed settings except
M250 and B in P, S and A modes
1/250
LCD shows 250
1/4000- 1/500sec, in M mode
1/250
LCD shows M250
1/250- Isec. in M mode
as set
LCD shows manually set shutter speed
M250and B in P, S, A and M
modes**
as set
No indication
FE2
1/250 or slower
A, 1/4000-1/500 sec.
1/250
—
1/250-8sec.
as set
-
M250 andB**
as set
—
FG
1/90 or slower
P.A. 1/1000-1/125S6C.
1/90
Two LEDs representing 1 /90sec. light up
1/60-Isec
as set
LED for manually set shutter speed lights up
M90 and B**
as set
No indication
F3-series
(via AS-4 or AS-7
coupler)
1/80 or slower
A
1/80
LCD shows 80
1/2000-1/125sec.
1/80
LCD shows M80
1/60~8sec. X. BandT
as set
LCD shows manually set shutter speed, no indication at B or T
FM2
1/250 or slower
1/250-1 sec. and B
as set
—
FG-20
1/90 or slower
A, ((* , 1/1000-1/125sec.
1/90
-
1/60~1sec., M90andB
as set
-
*ln TTL mode, programmed TTL auto flash operation will be performed with theAl-S type lens and F-501/N2020or F-301/N2000 set at programmed
auto exposure mode.
‘Improper for programmed TTL auto flash operation and TTL auto flash operation.
16