Nikon f2 User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Text mode
Original mode

place and insert the end of the film leader into any of
the slots in the film take-up spool. If necessary, release

the shutter and, then, stroke the film-advance lever slow

ly to make sure that the leader winds smoothly on the

spool and that the film edge perforations engage with
the film sprocket roller. When satisfied that the film is
properly feeding and is traveling correctly along the film

guide rails, close the camera back and return the 0/C

key to its normal storage position. (Also, see “Tips on

Camera Care” on page 36.)