A install the battery, O put the battery chamber lid back in its place, Basic operation – Nikon FM2 User Manual
Page 9: 4 remove the battery chamber lid
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BASIC OPERATION
4 Remove the battery
chamber lid ® .
Use a coin to unscrew the lid in a counter
clockwise direction.
A Install the battery.
Wipe the battery terminals clean
and insert the batteries, making sure that
the + signs are up. Usable batteries are:
• 3V lithium battery (1 unit)
• 1.55V silver-oxide batteries, 3.1V,
(2 units)
• 1.5V alkaline-manganese batteries, 3V,
(2 units)
Caution:
Keep batteries away from infants and
small children. In case a battery is accidentally
swallowed,
call
a
doctor
immediately
as
the
material inside the batteries can cause serious
problems.
O Put the battery chamber
lid back In its place.
Slip the battery clip back into the camera
body baseplate and screw it clockwise
tightly into place.
Note:
For more information on batteries, refer
to page 45.