Controls in detail—continued – Nikon FM2 User Manual

Page 46

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

CONTROLS IN DETAIL—continued

Ready-light @

When the SB-28, SB-27, SB-26, SB-25, SB-24, SB-22, SB-20,

SB-19 or SB-16B is attached to the FM2, the built-in LED
ready-light tells you when the speedlight is recycled and ready

to fire or when the shutter speed is set outside sync range,
without your having to remove your eye from the viewfinder.

Before you shoot, make sure the ready-light is on. The moment

the shutter is released, the speedlight will fire and the ready-

light will go out.

If the shutter speed is set between 1/500 sec. and 1/4000 sec.,

the ready-light will blink when the speedlight is fully charged, to
warn you that the shutter speed Is outside sync range.

For ready-light availability with speedlights other than the

SB-28, SB-27, SB-26, SB-25, SB-24, SB-22, SB-20, SB-19 and
SB-16B, refer to page 35.

Picture taken by balancing the flash exposure with daylight.