A a rewind the film, A^ put the film advance lever back into place, A a remove the film cartridge – Nikon FM2 User Manual

Page 19

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

A A Rewind the film.

Lift the film rewind crank and

turn it in the direction of the arrow. At the
end of film rewind, you will feel a slight

resistance. Continue winding one or two
more turns until the crank feels lighter;

this will indicate that the film leader is

now fully rewound into the cartridge.

A A Remove the film

cartridge.

Push the camera back lock lever in the

direction of the arrow as you lift the film

rewind crank to open the camera back.

Take out the film cartridge. Avoid unload

ing film in direct sunlight.

A^ Put the film advance

lever back into place.

Close the camera back and push the film

advance lever into place. When you're

not using the camera, you should set the

film advance lever to this position which

locks the shutter release button and

keeps the exposure indicator lamps in
side the viewfinder switched off even if
the shutter release button is accidentally
pressed.

Note: Even if the exposure indicator lamp is lit,

it will automatically be switched off in approx.
30 sec., and the exposure measuring circuit

will simultaneously be cut off.