Nikon NIKKOR ED 400mm f-2.8 IF - Manual (Page 13)

RECOMMENDED FOCUSING SCREENS
Various interchangeable focusing screens are available for F3- and F2-series cameras to
suit any type of lens or picture-taking situation. Those which are recommended for use
with your lens are listed below. For screens used with Nikon cameras other than F3-
and F2-series cameras (e.g., Nikon FA, FE2, FM2 and FE), refer to the column for F3-
series cameras. For the K2, B2 and E2 focusing screens, refer to the columns on the K,
B and E screens, respectively. For details, also refer to the specific focusing screen’s
instruction sheet.
Camera
^
^
A/L B
c
D E
G! G2 G3 G4 HI H2 H3 H4 J
K/P M
R T
u
F3 @ @ @ @ @ @ 0 O @ o @ @ © © ©
F2 @ @ @ @ @ @ o o @ o @ © ©
■ When the Teleconverter TC-201 or TC-20C
table:
is attached to this lens, use the following
^
.....Screen
Camera
■A/L B
c
D E G1 G2 G3 G4 HI H2 H3 H4 J K/P M R T
u
F3 @ @ o o @ o m ® ® ® ®
F2 @ ® o o @ o m ® ®
■ When the Teleconverter TC-301 or
table:
TC-300 is attached to this lens , use the following
S c r ee n
Camera
A/L B
c D E Gl G2 G3 G4 HI H2 H3 H4 J K/P M R T
u
F3 m @ O o @ o @ @ m ® ® ® ®
F2
® @ o o @ o @ o m ® ®
I When the Teleconverter TC-14B or TC-14 is attached to this lens, use the following
table:
~~~--~~......Screen
Camera
^ A/L B C D E Gl G2 G3 G4 HI H2 H3 H4
J K/P
M R T
u
F3 ©
© o o © o © © ©
© © ©
F2 © © o o ©
o
(-1)
(H) © © ©
0= Excellent focusing
#= Acceptable focusing
The split-image rangefinder, microprism or cross-hair area is dim. Focus on the sur­
rounding matte area.
0
=
Acceptable focusing
Slight vignetting (or moire phenomenon, in the case of the microprism) affects the
screen image. The image on the film, however, shows no trace of this.
B= Exposure measurement not possible; lens/screen combination permits only focus­
ing operation.
0 = Indicates degree of exposure compensation.
Blank means not usable.
13