Nikon E2N supplement - Manual (Page 9)

3 Release the shutter.
Image data is output from the V-Out (video
output) terminal.
—Continuous shooting operation cannot be
performed even when the shutter reiease
button is heid down.
—If no Image Memory Card is inserted, the
shutter can be released but no image data
is output.
—if the Image Memory Card cannot store data
(because of insufficient memory, write-
protection, etc.), the shutter cannot be
released.
Release the shutter again to renew
the video output.
—Whenever the shutter is released, video
output is renewed.
—In preview mode, video output operation
stops automatically after approx. 3 minutes
when the camera Is not In use. The power
will turn OFF after a further 16 seconds
when the camera is not In use. Press the
shutter release button halfway or set the
Main dial to any position other than C to
stop video output operation.
—You cannot use the command dial and
aperture dila to change modes and values
during video output. Cancel preview mode
to change shooting conditions once.
»NOTE
The following accessories for the E2/E2s camera can also be
used with the E2N.
• Rechargeable Battery Pack EN-1
• Quick Charger EH-1 (EH-2)
• DC Adapter ES-1 '-’S
- =.T-
• Image Memory Card EC-15
• Video Cable EG-10
• External Sync Adapter EX-10