Nikon 1000MM - Manual (Page 10)

Recommended Focusing Screens
Various interchangeable focusing screens are available for Nikon F3- and F2-series cameras
to suit any type of lens or picture-taking situation. Those which are recommended for use with
this lens are listed below. For screens used with Nikon cameras other than F3-and F2-series
cameras (e.g., Nikon FA, FE2, FM2 and FE), refer to the columns for F3-series cameras. For
the K2, B2 and E2 focusing screens, refer to the columns on the K, B and E screens, respectively.
For details, also refer to the specific focusing screen’s instruction sheet.
A/L B
c
D E G1 G2 G3 G4 HI H2 H3 H4 J K/P M R T u
F3 ©
o o
©
m m m
©
F2 m
©
o o © m ®
I When the Teleconverter TC-301 or TC-300 is attached to this lens, use the following
table*:
A/L B
c
D E G1 G2 G3 G4 HI H2 H3 H4 J K/P M R T
u
F3 ® © © ® ® ® ® ©
F2 ® © © ® ® ®
■ When the
table**;
Camera~^^— A/L B
c
D E G1 G2 G3 G4 HI H2 H3 H4 J K/P M R T
u
F3 ® ©
o o
© ® ® ® ® ©
F2 ® ©
o o
© ® ® ®
* To attach the TC-301 or TC-300 to the lens, filter shouuld first be detached.
** To attach the TC-14B or TC-14 to the lens, filter should first be detached.
@= Excellent focusing
#= Acceptable focusing
The image is brilUant from edge to edge, but the center area (range-finder, micro­
prism or corrs-hair) is dim. Focus on the surrounding matte area.
0= Acceptable focusing
Slight vignetting (or moire phenomenon, in the case of the microprism) affects the
screen image. The image on the film, however, shows no trace of this.
Blank means inapplicable.