Vermont Casting 1635 - Manual (Page 2)

2
Vermont Castings Seville
30001490
Introduction
Thank you for choosing a Vermont Castings Seville to meet your heating needs.
We're confident you will find the Seville to be an effective wood-burning heater incorporating
modern, non-catalytic combustion technology with the classic aesthetic appeal of its Vermont
Castings lineage.
The Seville achieves high-efficiency through precisely calibrated delivery of primary and
secondary air into a refractory-insulated firebox. Properly operated and maintained according
to the guidelines in this manual, your Seville will provide safe, dependable, and economical
heating for years to come.
The Seville Model 1635 series has been tested and is listed by Intertek
Testing Services/Warnock Hersey of Middleton, Wisconsin. The test
standards are ANSI/UL-1482 for the United States and ULC S627 and
CAN/CSA B366.2 for Canada.
The Seville Model 1635 is listed for burning wood fuel only. Do not burn other fuels.
The Seville Model 1635 complies with the standards set forth by the Federal Environmental
Protection Agency, 40 CFR Part 60.532(b)(2), as stated on the permanent label attached to
each stove. The Seville Model 1635 Series meets Washington State requirements.
We recommend that you hire a professional, solid-fuel stove technician to install your Seville,
or to advise you on the installation should you attempt to install it yourself. Consult the
authority having local jurisdiction (such as a municipal building department, fire department,
fire prevention bureau, etc.) before installation to determine the need for a building permit.
Also, consult your insurance agent to be sure your installation complies with specific
requirements that may vary locally.
In addition to directions on installation and operation, this manual includes directions on
maintenance and assembly. Please read this entire manual before you install or operate your
new room heater.
Save These Instructions For Future Reference.
Table of Contents
Specifications ..................................... 3
Installation .......................................... 4
Clearances ......................................... 12
Assembly ........................................... 14
Operation ........................................... 17
Maintenance ...................................... 21
Appendix - Draft Management ........... 23
Parts List ............................................ 26
Installation Accessories
#1882 Outside Air Kit
#1889 Bottom Heat Shield Kit
#2960 Convection Fan Kit - 140 cfm.
#1875 Brass Leg Kit
#1885 Pedestal - Classic Black
#1886 Pedestal - Sand
#1887 Pedestal - Moonlight Blue
#1888 Pedestal - Forest Green