Maintenance, Maintenance schedule – Craftsman 107.289920 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MAINTENANCE
MAINTENANCE SCHEDULE
The following schedules should be followed for normal care of your rider and mower.
RIDER MAINTENANCE, All Models
Before
Each Use
Spring
&Fall
8
Hours
25
Hours
100
Hours
200
Hours
Yearly
Clean Debris from Rider and Engine Compartment *
•
Clean Debris from Engine Cooling Areas & Air Filter *
•
Check Tire Pressure
•
Lubricate Rider & Mower *
•
Clean Deck & Check/Replace Mower Blades
•
Clean Battery & Cables
•
Check Rider Safety System **
•
•
•
Check / Adjust PTC Clutch
•
ENGINE MAINTENANCE,
26HP Briggs & Stratton
8 Hours or
Daily
25 Hours or
Every
Season
50 Hours or
Every
Season
100 Hours or
Every
Season
Yearly
Check Engine Oil Level *
•
Service Air Pre-Cleaner *
•
Change Oil *
•
Service Air Filter *
•
Change Oil & Filter *
•
Clean Cooling Fins
*
•
Replace Air Filter *
•
Replace Spark Plug
•
Replace Fuel Filter f
•
Check Valve Clearance f
•
* More often in hot (over 85° F: 30° C) weather or dusty operating conditions.
** Check the function of the safety system after the unit has been stored for 30 days or longer,
t These services should be performed by Sears or other qualified service dealer.
22