Craftsman 358.352680 - Manual (Page 5)

prone to circulation disorders or
abnormal swelling. Prolonged use in
cold weather has been linked to blood
vessel damage in otherwise healthy
people. If symptoms occur such as
numbness, pain, loss of strength,
change in skin color or texture, or loss
of feeling In the fingers, hands, or joints,
discontinue the use of this tool and
seek medical attention. An
anti-vibration system does not
guarantee the avoidance of these
problems. Users who operate power
tools on a continual and regular basis
must closely monitor their physical
condition and the condition of this tool.
CHAIN BRAKE If this saw is to be used
for commercial togging, you must order
and install a chain brake to comply with
Federal OSHA Regulations for Com­
mercial Logging. Contact your Sears
Sen/ice Center or call 1-800-235-5878.
SPARK ARRESTOR: Yoursaw is
equipped with a temperature limiting
muffler and spark arresting screen
which meets the requirements of
California Codes 4442 and 4443. All
U.S. forest land and the states of
California, Idaho, Maine, Minnesota,
New Jersey, Oregon, and Washington
require by law that many internal
combustion engines be equipped with a
spark arrestor screen, if you operate a
chain saw in a state or locale where
such regulations exist, you are legally
responsible for maintaining the
operating condition of these parts.
Failure to do so is a violation of the law.
Refer to Customer Responsibilities
chart in the maintenance section.
STANDARDS: This chain saw is listed
by Undenwriters Laboratories, Inc, in
accordance with American National
Standards for Gasoline-Powered Chain
Saws Safety Requirements (ANSI
B175.1-199T).
ASSEMBLY
CARTON CONTENTS
Check carton contents against the fol-
fowing list­
Model 358.352680
• Chain Saw (fuHy assembled}
• Bar too!
• Chain
• Carrying Case
• Gloves
• Gas Can
• Bar & Chain Lube
« 2-cycle engine oil
• Examine parts for damage. Do not
use damaged parts.
• If you need assistance or find that
parts are missing or damaged, please
call 1-800-235-5878.
NOTE: It is normal to hear the fuel filter
rattle in an empty fuel tank.
Your unit has been factory tested and
the carburetor precisely adjusted. As a
result you may smell gasoline or find a
drop of oil/fue! residue on the muifter
when you unpack the unit.
ASSEMBLY
Your saw is fully assembled; no
assembly is necessary.