Safety rules, Warning – Craftsman 580.762200 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SAFETY RULES
CAUTION: ALWAYS DISCONNECT SPARK PLUG WIRE AND PUCE WIRE WHERE IT CAN
NOT CONTACT SPARK PLUG, TO PREVENT ACCIDENTAL STARTING WHEN SETTING UP,
TRANSPORTING, ADJUSTING OR MAKING REPAIRS TO YOUR HIGH PRESSURE WASHER.
CAUTION:
Before
using
this
product,
read this manual and follow all Safety
Rules and Operating Instructions,
WARNING;
The engine exhaust from this product
contains chemicals known to the State
of California to cause cancer, birth
defects, or other reproductive harm.
Engine exhaust gases contain DEADLY carbon monoxide
gas. This dangerous gas, If breathed in sufficient concen
trations, can cause unconsciousness or even death.
Operate this equipment only in the open air where ade
quate ventilation is available.
Gasoline is highly FLAMMABLE and its vapors are
EXPLOSIVE. Do not permit smoking, open llames, sparks
or heat in the vicinity while handling gasoline. Avoid
spilling gasoiine on a hot engine. Allow unit to cool for 2
minutes before refueling. Comply w№ all laws regulating
storage and handling of gasoline.
Locate this pressure washer in areas away from com
bustible materials, combustible fumes or dust.
The high pressure equipment is designed to be used with
Sears authorized parts oniy. If you use this equipment with
parts that do not compiy with minimum specifications, the
user assumes all risks and liabilities.
Some chemicals or detergents may be harmful if inhaled
or ingested, causing severe nausea, fainting or poisoning.
The harmful elements may cause property damage or
severe injury.
Do not allow CHILDREN to operate the Pressure Washer
at any time.
Operate engine only at governed speed. Running the
engine at excessive speeds increases the hazard of per
sona! injury. Do not tamper with parts which may increase
or decrease the governed speed.
Do not wear ioose clothing, jewelry or anything that may
be caught in ttie starter or other rotating parts.
Before starting ttte Pressure Washer in cold weather,
check all parts of the equipment and be sure ice has not
formed there.
Units with broken or missing parts, or without protective
housing or covers should NEVER be operated.
The muffler and air cleaner must be installed and in good
condition before operating the Pressure Washer, These
components act as spark arrestors if tie engine backfires.
Check the fuel system for leaks or signs of deterioration
such as chafed or spongy hose, ioose or missing clamps
or damaged tank or cap. Correct all defects before operat
ing the Pressure Washer,
Do not spray flammable liquids.
Never allow
any
part of the body to come in contact with
the fluid stream. DO NOT come in contact with a fluid
stream created by a leak in the high pressure hose.
High pressure streams of fluid this equipment produces
can pierce skin and its underlying tissues, leading to seri
ous Injury and possible amputation.
Never aim tiie gun at people, animals or plants.
High pressure spray can cause paint chips or other parti
cles to become airborne and fly at high speeds.
Always wear eye protection when you use this equipment or
lAlien you are in the vicinity where the equipment is in use.
Operate the pressure at no more than the PSI fluid pres
sure rated for your pressure washer.
Never move the machine by pulling on the high pressure
hose. Use the handle provided on the top of ttte unit.
Always be certain the spray gun, nozzles and accessories
are correctly attached
Never use a spray gun which does not have a trigger lock
or trigger guard in place and in working order.
Use a respirator or mask whenever there is a chance that
vapors may be inhaled. Read ail instructions with Ihe mask
so you are certain the mask will provide the necessary
protection against inhaling harmful vapors.
High pressure spray may damage fragile items including
glass. Do not point spray gun at glass when in the jet
spray mode.
Keep fie hose connected to machine or the spray gun
while the system is pressurized. Disconnecting the hose
while the unit is pressurized is dangerous.
Hold fre spray gun firmly in your hand before you start the
unit. Failure to do so could result in an injury from a whip
ping spray gun. Do not leave the spray gun unattended
while the machine is running.
The cleaning area should have adequate slopes and
drainage to reduce the possibility of a fail due to slippery
surfaces.
Keep water spray away from electric wiring or fatal electric
shock may result.
Do not adjust unloader valve to a pressure in excess of
machine rating.
Do not secure trigger gun in the puil-back {open) position.
Do not by-pass arry safety device on this machine.
The muffler and engine beat up during operation and
remain hot immediately after shutting It down. Avoid con
tact with a hot muffler or engine or you could be severely
burned.
MAINTENANCE AND STORAGE:
• Operate and store this unit on a stable surface.
» High pressure hose can develop leaks from wear, kinking,
abuse, etc. Water spraying from a leak is capable of inject
ing material into sWn. Inspect hose each time before using
it. Check all hoses for cuts, leaks, abrasions or bulging of
cover, or damage or movement of couplings, if any of
these conditions exist, replace hose immediately. Never
repair high pressure hose. Replace it with another hose
that meets minimum pressure rating of your pressure
washer.
A
LOOK
FOR
THIS
SYMBOL
TO
POINT
OUT
IMPORTANT
SAFETY
PRECAUTIONS.
IT MEANS “ATTENTION!!! BECOME ALERT!!! YOUR SAFETY IS INVOLVED.”