Craftsman 580.762200 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

0-RING MAINTENANCE
Through ttie noitnal operation of your pressure washer,
O-Rlngs, which keep the connections of the hoses and
gun fight and leak-free may become worn or damaged.
Provided with your pressure washer is an 0-Ring
Maintenance Kitwhidi provides replacement 0-Rings,
Rubber Washer and Quick Connect filter.
Parts in tiie 0-Ring Kit Include:
» 2 0-Rlngs (p/n 97837) for each end of the nozzle
extension.
1 O-Ring (p/n B2386) for the outside of the Male
Quick-Connect
o
2
0-Rings (p/n B2264) for the ends of the high pres
sure hose.
o
Note: The above two 0-Rings are dose in size. Please
match carefully to assure proper O-Ring usage.
» 1 Rubber Washer (p/n B2385) for the inside of the
Male Quick-Connect.
1 Water Inlet Screen (p/n B2384) for the Female
Quick-Connect.
1 o-ring (p/n B2688) for the connection end of the
itrtating brush. .....................
.......
O-Ring
To remove a worn or damaged O-Ring:
• Use a small flathead screwdriver to get underneath
the O-Ring and pry it off.
14